View KME350VBXXX_1113998.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

KME Series
Miniature General Purpose Solvent Proof 105 C Maximum Temperature
MINIATURE -105 C
KME
Actual Size
The KME series capacitors, except for those rated at 350-400 volts, were developed to withstand HCFC cleaning agents for five minutes by ultrasonic, vapor or immersion. This solvent proof design allows all circuit board components to be cleaned together, at the same time, without resorting to more expensive epoxy end-sealed capacitors. Refer to the Mini-Glossary for recommended cleaning conditions.
Summary of Specifications
Radial lead terminals. Capacitance range: 0.1 to 15,000F. Voltage range: 6.3 to 400VDC. Operating temperature range: 55 C to 105 C for 6.3 to 100V; 40 C to 105 C for 160 to 400V. Leakage current: See specifications table for leakage current values at 20 C.
w
w
w
.d
ee sh ta a
u. t4
om c
Standard capacitance tolerance: 20% Nominal case size (D L): 5 11mm to 18 40mm. Rated lifetime: 1,000 hours at 105 C with the rated ripple current applied.
150
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
www..com
The KME series capacitors are our standard general purpose capacitors. These radial lead capacitors are available in a wide range of voltage and capacitance ratings and have a rated lifetime of 1,000 hours with the rated ripple current applied. The KME series capacitors with working voltage of 100 or under also have a very low DC leakage current, .002CV or 2 A, whichever is greater after 2 minutes at 20 C.
KME Series
KME Specifications
Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current At 55 to 105 C for 6.3 to 100VDC; 6.3 to 400VDC 0.1 to 15,000 F 20% ( M ) at 20 C
DC Rated Voltage 6.3 -100V 160 - 400V Test Time After 2 minutes After 1 minute After 5 minutes I CV 1,000: I CV 1,000: I Leakage Current ( A ) 0.002CV or 2 A, whichever is greater. 0.1CV 40 0.03CV 15 CV >1,000: I CV >1,000: I 0.04CV 100 0.02CV 25
Characteristics 40 to 105 C for 160 to 400VDC
20 C, 120Hz
MINIATURE -105 C
Where I = Leakage current ( A ), C = Nominal capacitance ( F ) and V = Rated voltage ( V )
KME
Dissipation Factor ( Tan )
At
20 C, 120Hz
6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 0.09 100 0.08 160 - 250 0.20 350 - 400 0.24
Rated Voltage ( V ) Tan ( DF )
When nominal capacitance exceeds 1,000 F, add 0.02 to the values above for each 1,000 F increase.
Low Temperature Characteristics
At 120Hz, impedance ( Z ) ratio between the exceed the values given below.
Rated Voltage ( V ) Z ( 25 C ) / Z ( 20 C ) Z ( 40 C ) / Z ( 20 C ) 6.3 4 8 10 3 6 16 2 4
25 C or
25 2 3 35 2 3
40 C value and
50 2 3 63 -100 2 3
20 C value shall not
160 - 250 350 - 400 3 4 6 6
Ripple Current Multipliers Refer to Section 4 of the Mini-Glossary for explanation of Ripple Current Multipliers.
Ambient Temperature ( C )
85 C 1.75 105 C 1.00
Frequency (Hz )
Capacitance ( F ) 3.3 F 4.7- 33 F 47-1000 F 2200 F 50Hz 0.65 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.25 1.15 1.03 1kHz 1.75 1.50 1.30 1.05 10kHz 2.30 1.75 1.40 1.08 100kHz 2.50 1.80 1.50 1.08
Load Life
The following specifications shall be satisfied when the capacitors are restored to 20 C after subjecting them to the DC rated voltage for 1,000 hours at 105 C with the rated ripple current applied. The sum of DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors. Capacitance change: 20% of initial measured value Tan ( DF ) : 200% of initial specified value Leakage current : initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them for 1,000 hours at 105 C without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements. Capacitance change: 20% of initial measured value Tan ( DF ) : 200% of initial specified value Leakage current : initial specified value for 6.3 -100V : 500% of initial specified value for 160 - 400V
Others
Satisfies characteristic W of JIS C5141
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
151
KME Series
Diagram of Dimensions
VB/Radial Lead
Unit: mm
PVC Sleeve d D' D F F F F
L Vent (Except 5) L' 15 MIN. 4 MIN.
5~ 8
10
12.5 ~ 18
MINIATURE -105 C
KME
Gas escape end seal for all case diameters.
OD
OD' max.
OD OD OD OD OD
For optional lead configurations and tape and ammo packaging, refer to the beginning of the Miniature section.
5 6.3 8 10, 12.5 16, 18
0.5 0.5 0.5 0.5 0.5
L' max. L 1.5 L 1.5 L 1.5 L 1.5 L 1.5
Od
0.5 0.5 0.6 0.6 0.8
F 0.5 2.0 2.5 3.5 5.0 7.5
Part Numbering System for KME Series
KME 200 VB 22R M 10X20
When ordering, always specify complete catalog number for KME Series.
LL
Lead Length: LL is Standard. Case Code: See Case Sizes in Tables. Capacitance Tolerance: M = 20% Capacitance Value: Expressed in Microfarads. The first two digits are significant figures, and the third digit indicates the number of zeros for capacitance of 100 F or more. R indicates the decimal point for capacitance less than 100 F (e.g. R22 = .22 F; 2R2 = 2.2 F; 22R = 22 F; 221 = 220 F; 222 = 2,200 F; 223 = 22,000 F ). Lead Configuration: VB = Radial Lead. DC Rated Voltage: Expressed in Volts (e.g. 200 = 200WVDC). Series Name: Indicates Basic Capacitor Design.
Standard Voltage Ratings - VB/Radial Lead
Rated Voltage (WVDC) Capacitance (F ) Catalog Part Number Nominal Case Size* D L ( mm ) Maximum ESR ( ) at 20 C, 120Hz Maximum Ripple Current ( mA rms) at 105 C, 120Hz
54 65 95 160 195 270 460 810 960 1,330 1,500 1,765 2,075
6.3 Volts
8 Volts Surge
33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 15,000
KME6.3VB33RM5X11LL KME6.3VB47RM5X11LL KME6.3VB101M5X11LL KME6.3VB221M6X11LL KME6.3VB331M6X11LL KME6.3VB471M8X11LL KME6.3VB102M10X12LL KME6.3VB222M12X20LL KME6.3VB332M12X20LL KME6.3VB472M16X25LL KME6.3VB682M16X25LL KME6.3VB103M16X31LL KME6.3VB153M18X35LL
5 5 5 6.3 6.3 8 10 12.5 12.5 16 16 16 18
11 11 11 11 11 11.5 12.5 20 20 25 25 31.5 35.5
11.05 7.759 3.647 1.658 1.105 0.776 0.365 0.181 0.131 0.099 0.078 0.066 0.055
*The case sizes in table are with no sleeve, refer to diagram for case sizes with sleeve.
152
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
KME Series
Standard Voltage Ratings - VB/Radial Lead
Rated Voltage (WVDC) Capacitance (F ) Catalog Part Number Nominal Case Size* D L ( mm ) Maximum ESR ( ) at 20 C, 120Hz Maximum Ripple Current ( mA rms) at 105 C, 120Hz
49 60 70 105 175 245 290 550 860 1,100 1,400 1,690 1,950 35 54 64 77 125 215 260 370 640 1,000 1,300 1,600 1,900 2,060 26 38 57 69 82 135 230 335 440 770 1,170 1,460 1,780 1,950 28 41 61 75 100 170 300 400 520 920 1,340 1,650 1,900
10 Volts
13 Volts Surge
22 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 10 22 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10,000 4.7 10 22 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 4.7 10 22 33 47 100 220 330 470 1,000 2,200 3,300 4,700
KME10VB22RM5X11LL KME10VB33RM5X11LL KME10VB47RM5X11LL KME10VB101M5X11LL KME10VB221M6X11LL KME10VB331M8X11LL KME10VB471M8X11LL KME10VB102M10X16LL KME10VB222M12X20LL KME10VB332M12X25LL KME10VB472M16X25LL KME10VB682M16X31LL KME10VB103M18X35LL KME16VB10RM5X11LL KME16VB22RM5X11LL KME16VB33RM5X11LL KME16VB47RM5X11LL KME16VB101M6X11LL KME16VB221M8X11LL KME16VB331M8X11LL KME16VB471M10X12LL KME16VB102M10X20LL KME16VB222M12X25LL KME16VB332M16X25LL KME16VB472M16X31LL KME16VB682M18X35LL KME16VB103M18X40LL KME25VB4R7M5X11LL KME25VB10RM5X11LL KME25VB22RM5X11LL KME25VB33RM5X11LL KME25VB47RM5X11LL KME25VB101M6X11LL KME25VB221M8X11LL KME25VB331M10X12LL KME25VB471M10X16LL KME25VB102M12X20LL KME25VB222M16X25LL KME25VB332M16X31LL KME25VB472M18X35LL KME25VB682M18X40LL KME35VB4R7M5X11LL KME35VB10RM5X11LL KME35VB22RM5X11LL KME35VB33RM5X11LL KME35VB47RM6X11LL KME35VB101M8X11LL KME35VB221M10X12LL KME35VB331M10X16LL KME35VB471M10X20LL KME35VB102M12X25LL KME35VB222M16X31LL KME35VB332M18X35LL KME35VB472M18X40LL
5 5 5 5 6.3 8 8 10 12.5 12.5 16 16 18 5 5 5 5 6.3 8 8 10 10 12.5 16 16 18 18 5 5 5 5 5 6.3 8 10 10 12.5 16 16 18 18 5 5 5 5 6.3 8 10 10 10 12.5 16 18 18
11 11 11 11 11 11.5 11.5 16 20 25 25 31.5 35.5 11 11 11 11 11 11.5 11.5 12.5 20 25 25 31.5 35.5 40 11 11 11 11 11 11 11.5 12.5 16 20 25 31.5 35.5 40 11 11 11 11 11 11.5 12.5 16 20 25 31.5 35.5 40
14.315 9.543 6.701 3.149 1.431 0.954 0.67 0.315 0.158 0.116 0.088 0.071 0.061 26.52 12.055 8.036 5.643 2.652 1.205 0.804 0.564 0.265 0.136 0.1 0.078 0.063 0.061 49.372 23.205 10.548 7.032 4.937 2.321 1.055 0.703 0.494 0.232 0.121 0.09 0.071 0.059 42.319 19.89 9.041 6.027 4.232 1.989 0.904 0.603 0.423 0.199 0.105 0.08 0.063
MINIATURE -105 C
KME
16 Volts
20 Volts Surge
25 Volts
32 Volts Surge
35 Volts
44 Volts Surge
*The case sizes in table are with no sleeve, refer to diagram for case sizes with sleeve.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
153
KME Series
Standard Voltage Ratings - VB/Radial Lead
Rated Voltage (WVDC) Capacitance (F ) Catalog Part Number Nominal Case Size* D L ( mm ) Maximum ESR ( ) at 20 C, 120Hz Maximum Ripple Current ( mA rms) at 105 C, 120Hz
1.3 2.9 4.4 7.0 13 20 25 30 46 68 90 110 180 345 460 610 1,080 1,530 32 50 82 100 135 225 400 540 700 1,210 2.6 5.8 7.8 10 15 23 29 34 56 96 140 180 320 570 700 880 9.0 12 19 26 31 59 95 125 165 270 450
50 Volts
63 Volts Surge
0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1,000 2,200 4.7 10 22 33 47 100 220 330 470 1,000 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220
KME50VBR10M5X11LL KME50VBR22M5X11LL KME50VBR33M5X11LL KME50VBR47M5X11LL KME50VB1R0M5X11LL KME50VB2R2M5X11LL KME50VB3R3M5X11LL KME50VB4R7M5X11LL KME50VB10RM5X11LL KME50VB22RM5X11LL KME50VB33RM6X11LL KME50VB47RM6X11LL KME50VB101M8X11LL KME50VB221M10X16LL KME50VB331M10X20LL KME50VB471M12X20LL KME50VB102M16X25LL KME50VB222M18X35LL KME63VB4R7M5X11LL KME63VB10RM5X11LL KME63VB22RM6X11LL KME63VB33RM6X11LL KME63VB47RM8X11LL KME63VB101M10X12LL KME63VB221M10X20LL KME63VB331M12X20LL KME63VB471M12X25LL KME63VB102M16X31LL KME100VBR10M5X11LL KME100VBR22M5X11LL KME100VBR33M5X11LL KME100VBR47M5X11LL KME100VB1R0M5X11LL KME100VB2R2M5X11LL KME100VB3R3M5X11LL KME100VB4R7M5X11LL KME100VB10RM6X11LL KME100VB22RM8X11LL KME100VB33RM10X12LL KME100VB47RM10X16LL KME100VB101M12X20LL KME100VB221M16X25LL KME100VB331M16X25LL KME100VB471M16X31LL KME160VBR47M6X11LL KME160VB1R0M6X11LL KME160VB2R2M6X11LL KME160VB3R3M8X11LL KME160VB4R7M8X11LL KME160VB10RM10X16LL KME160VB22RM10X20LL KME160VB33RM12X20LL KME160VB47RM12X25LL KME160VB101M16X25LL KME160VB221M18X35LL
5 5 5 5 5 5 5 5 5 5 6.3 6.3 8 10 10 12.5 16 18 5 5 6.3 6.3 8 10 10 12.5 12.5 16 5 5 5 5 5 5 5 5 6.3 8 10 10 12.5 16 16 16 6.3 6.3 6.3 8 8 10 10 12.5 12.5 16 18
11 11 11 11 11 11 11 11 11 11 11 11 11.5 16 20 20 25 35.5 11 11 11 11 11.5 12.5 20 20 25 31.5 11 11 11 11 11 11 11 11 11 11.5 12.5 16 20 25 25 31.5 11 11 11 11.5 11.5 16 20 20 25 25 35.5
1,657.5 753.409 502.273 352.66 165.75 75.341 50.227 35.266 16.575 7.534 5.023 3.527 1.658 0.753 0.502 0.353 0.166 0.09 31.739 14.918 6.781 4.52 3.174 1.492 0.678 0.452 0.317 0.149 1,326.0 602.727 401.818 282.128 132.6 60.273 40.182 28.213 13.26 6.027 4.018 2.821 1.326 0.603 0.402 0.282 705.319 331.5 150.682 100.455 70.532 33.15 15.068 10.045 7.053 3.315 1.507
MINIATURE -105 C
KME
63 Volts
79 Volts Surge
100 Volts
125 Volts Surge
160 Volts
200 Volts Surge
*The case sizes in table are with no sleeve, refer to diagram for case sizes with sleeve.
154
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
KME Series
Standard Voltage Ratings - VB/Radial Lead
Rated Voltage (WVDC) Capacitance (F ) Catalog Part Number Nominal Case Size* D L ( mm ) Maximum ESR ( ) at 20 C, 120Hz Maximum Ripple Current ( mA rms) at 105 C, 120Hz
9.0 12 19 26 36 59 95 140 165 285 470 9.0 12 21 30 36 64 110 140 180 310 10 18 30 37 48 79 130 175 230 330 18 30 40 52 79 145 185 230
200 Volts
250 Volts Surge
0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 1.0 2.2 3.3 4.7 10 22 33 47
KME200VBR47M6X11LL KME200VB1R0M6X11LL KME200VB2R2M6X11LL KME200VB3R3M8X11LL KME200VB4R7M10X12LL KME200VB10RM10X16LL KME200VB22RM10X20LL KME200VB33RM12X25LL KME200VB47RM12X25LL KME200VB101M16X31LL KME200VB221M18X40LL KME250VBR47M6X11LL KME250VB1R0M6X11LL KME250VB2R2M8X11LL KME250VB3R3M10X12LL KME250VB4R7M10X12LL KME250VB10RM10X20LL KME250VB22RM12X25LL KME250VB33RM12X25LL KME250VB47RM16X25LL KME250VB101M18X35LL KME350VBR47M8X11LL KME350VB1R0M10X12LL KME350VB2R2M10X16LL KME350VB3R3M10X16LL KME350VB4R7M10X20LL KME350VB10RM12X20LL KME350VB22RM16X20LL KME350VB33RM16X25LL KME350VB47RM16X35LL KME350VB101M18X40LL KME400VB1R0M10X12LL KME400VB2R2M10X16LL KME400VB3R3M10X20LL KME400VB4R7M10X25LL KME400VB10RM12X20LL KME400VB22RM16X25LL KME400VB33RM16X31LL KME400VB47RM18X31LL
6.3 6.3 6.3 8 10 10 10 12.5 12.5 16 18 6.3 6.3 8 10 10 10 12.5 12.5 16 18 8 10 10 10 10 12.5 16 16 16 18 10 10 10 10 12.5 16 16 18
11 11 11 11.5 12.5 16 20 25 25 31.5 40 11 11 11.5 12.5 12.5 20 25 25 25 35.5 11.5 12.5 16 16 20 20 20 25 35.5 40 12.5 16 20 25 20 25 31.5 31.5
705.319 331.5 150.682 100.455 70.532 33.15 15.068 10.045 7.053 3.315 1.507 705.319 331.5 150.682 100.455 70.532 33.15 15.068 10.045 7.053 3.315 846.383 397.8 180.818 120.545 84.638 39.78 18.082 12.055 8.464 3.978 397.8 180.818 120.545 84.638 39.78 18.082 12.055 8.464
MINIATURE -105 C
KME
250 Volts
300 Volts Surge
350 Volts
400 Volts Surge Not Solvent Proof
400 Volts
450 Volts Surge Not Solvent Proof
*The case sizes in table are with no sleeve, refer to diagram for case sizes with sleeve.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
155
KME Series
Temperature Characteristics
KME6.3VB102M10X12 KME16VB332M16X25 (at 120Hz)
Temperature Characteristics
KME50VB1R0M5X11 KME50VB101M8X11 (at 120Hz)
Capacitance Change (%)
0
Capacitance Change (%)
40 20 0 20 40 60 80 105
10
10
0
MINIATURE -105 C
10
10
KME
20
20
55
40
20
0
20
40
60
80
105
Dissipation Factor ( Tan )
Dissipation Factor ( Tan )
40 20 0 20 40 60 80 105
10
10
1
1
0.1
0.1
0.01
0.01
55
40
20
0
20
40
60
80
105
Temperature ( C)
Temperature ( C)
Impedance - Frequency Characteristics
KME6.3VB102M10X12 KME16VB332M16X25 (at 20 C)
Impedance - Frequency Characteristics
KME50VB1R0M5X11 KME50VB101M8X11 (at 20 C)
Impedance (ohms)
Impedance (ohms)
100 1k 10k 100k 1M
10
10k
1k
1
100 0.1 10
0.01 1
Frequency (Hz)
0.1 100 1k 10k 100k
Frequency (Hz)
156
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com

▲Up To Search▲

Price & Availability of KME350VBXXX

	To Download KME350VBXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .